SOLAR POWER IN WISCONSIN

Archive for August, 2010

USA – China – A G2 For Climate and Economy?

China appears to view global warming as an economic issue, Obama’s administration is primarily focused on the current economic crisis as well, but climate change is also a serious crisis and a threat to the world’s economic system itself with all its present and predicted impacts. Don’t these global problems require an integrated economic and environmental strategy? The hypothesized summit between Barack Obama and the Chinese president, Hu Jintao, could be an important step to accelerate urgent actions needed both to face the global economic downturn and to build a solid climate pact.

China, in its last 5-year plan, sets targets to reduce national energy intensity (energy used per unit of GDP) by 20% between 2006 and the end of 2010. According to Deborah Seligsohn, China Program Director on Climate, Energy and Pollution of the World Resources Institute, this target seems to be realizable given their latest remarkable record (-1.8% in 2006, -3.7% in 2007, and -4.2% in 2008.) Last month Hillary Clinton met experts from the Asia Society and the Pew Centre for Climate Change that together wrote a report that could help the creation of this US-Chinese partnership on climate change. But the good examples from China, although not directly referred to CO2 emissions, and Obama’s ambitious plan on energy and climate will need decisions from other 13 countries (or federations such as the EU), including Russia, India, Japan to get 80% of world’s emissions “under control”. Nowadays the other 173 countries account for about 20% of total CO2 emissions, but population increase and old development patterns could dangerously increase their “pollution share” in the future: every nation will be then required to cut the CO2, but large amount of money are needed to do so. Where will our leaders take Dollars, Yuan or Euros these days?

Next steps: -264 days to COP15:
Two events along the path to Copenhagen will take place in Bonn from March 29th to April 8th: the 7th session of the AWG-KP (Ad Hoc Working Group on Further Commitments for Annex 1Parties under the Kyoto Protocol) and 5th session of the AWG-LCA (Ad Hoc Working Group on Long-term Cooperative Action under the Convention). As we can read on the UNFCCC website “this is the first of three planned negotiating sessions before COP 15 in December” and can hopefully prepare a good ground for delegations and political leaders to decide upon.

Written by Luca Marazzi on behalf of Responding to Climate Change.

For further information on Climate Change please visit the Responding to Climate Change website – http://www.rtcc.org

Article Source: http://EzineArticles.com/?expert=Luca_Marazzi

Going Green-6

Analysis of Cleanliness

You cannot control that which you do not measure.

In more and more industries, the exact knowledge of particle contamination is gaining in importance. Contamination of materials in dimensions of a few micrometers was mainly of concern for the pharmaceutical and semiconductor industries. However, not only manufacturers of circuit board components, but also traditional car parts suppliers face new demands on particle recognition and contamination source identification.

Cleanliness for the automotive parts manufacturers has become a huge topic in today’s ever challenging continuous improvement world. The need to define, measure and control the levels of particulate contamination on product is the new norm for suppliers and automotive OEM’s.

Cleanliness directly relates to product warranties, reliability, performance and safety issues. It has long been known that a dirty product gives us poor quality and low life expectancy. The dirtier the transmission from new, the less time it will last.

It is crucial now to identify particles and their source so that effective elimination can be achieved. Residual contamination consists of particles that persist on the component’s surface after the final step in manufacturing. Such contaminants are introduced via parts from suppliers or arise during processing. After vehicle assembly, the contaminant particles can cause severe damage, loss of function or reduce the lifetime of the product.

Cleanliness is defined as the contamination level of a component surface. Common measures to quantify the cleanliness are mass of the contaminants as well as number, size of the dirt particles. In general, the customer will specify contamination limits. The supplier then has to maintain these levels and document them regularly by means of contamination analysis.

The analysis of the contamination has to be proven to not affect the result and to be effective in evaluating all the contamination present. Methods of extraction and evaluation are specified in the international standard ISO 16232. Particular attention must be paid to the extraction method to ensure no contributing factors are introduced to the evaluation. There are different methods of counting the resulting extracted particles but by far the most accurate, repeatable and cost effective is automated microscope analysis. The microscope with software can scan the filter membrane; sort the particles by size class and even determine basic material composition (metal, non-metal, fiber). Once the data is gathered a custom report can be generated based on the customer requirements.

For more information on cleanliness analysis, visit http://www.onclean.com

Chris Trower is the President of Onclean Labs Inc, an Ontario based lab specializing in third party cleanliness analysis testing.

Free Energy Economics

What it Really Is: Recycling

Recycling has become the catch all phrase often used in place of the 3 R’s. But in its truest form recycling means taking one thing and changing it, usually chemically, into another. This is not to say that recycling is without value; it is certainly better than putting the items in the bin where they will end up in landfills and leach chemicals into our ground water. It is though to say that before you place anything in the recycle bag, first consider if you could reduce or re-use it, because everything that ends up in the recycling bag will have to be altered before it can be used again. Even then it is cleaner to produce goods from recyclables than from raw materials.

Here are just a few reasons to make certain that after you have reduced the amount of waste your create and re-used as many things as possible that your family puts as many things as possible into the recycling bins:

• Recycling one aluminium can saves enough energy to run a TV for three hours — or the equivalent of a half a gallon of gasoline.
• Each ton (2000 pounds) of recycled paper can save 17 trees, 380 gallons of oil, three cubic yards of landfill space, 4000 kilowatts of energy, and 7000 gallons of water. This represents a 64% energy savings, a 58% water savings, and 60 pounds less of air pollution!
• The 17 trees saved (above) can absorb a total of 250 pounds of carbon dioxide from the air each year. Burning that same ton of paper would create 1500 pounds of carbon dioxide.
• Recycling plastic saves twice as much energy as burning it in an incinerator.
• The energy saved from recycling one glass bottle can run a 100-watt light bulb for four hours. It also causes 20% less air pollution and 50% less water pollution than when a new bottle is made from raw materials.
• A modern glass bottle would take 4000 years or more to decompose — and even longer if it’s in the landfill.

Today is the actually a great day to talk about recycling. Each Thursday the council sends around men to collect our recyclables. The council gives us re-usable sacks, which we can use to collect all paper, cardboard, tin cans, aluminium, glass bottles and jars and plastic bottles. Unfortunately, they do not over recycling for other plastics. As I have been writing this series of blogs that has been one thing that I have been especially mindful of: how much plastic packaging manufacturers use that cannot be recycled and that it is estimated takes over 500 years to decompose in landfills.

But it is not just our plastics, glass, metals and paper that we recycle. Thanks to a wonderful programme through the Islington council, last year we were able to purchase a subsidized wormery to recycle our food waste into compost and liquid fertilizer for growing my own food. Actually, even though we may think that food thrown into the bin will degrade relatively quickly in the landfills, the biggest problem is the amount of methane, a dangerous green house gas, which it produces in that time. Methane is twenty times more potent than carbon dioxide and a major contribute to climate change. While my wormery cannot accommodate meat products I put all peels and unused fruits and vegetables into it. I should soon be harvesting my first patch of compost…just in time for my summer garden.

So how does my family do on recycling? Not too bad honestly. This week we had two bags of recyables and will only have two half full 13 gallon bin bags of other rubbish. Actually hubby and I got into a minor disagreement over the trash last night. One of the first rules of the 3R’s is to only throw out your garbage when the bag is full. In our case though, it had begun to smell. I am still looking for a solution…if anyone has ideas they would be greatly appreciated. But for a family of three adults and one pre-schoolers two large bags of recycling and one full 13 gallon bin bag in a week is pretty good I think. I imagine that there are single people, who put more than one bag in the bin each week.

Terri O’Neale is the mother of six; ranging in age from 3 to 22. She has been both a working and stay-at-home mother at various times in her life. She was also a single mother for almost five years, before re-marrying the love of her life at the age of forty. Obviously, she has a life-time of training in raising a family on a tight budget. In addition to these real life experiences, she possesses a bachelors degree in health education and a minored in environmental management in her masters programme.

Terri feels strongly that this is one of the most challenging times in history for the family, but she also believes that families with the will and resolve to address the pressing issues of saving money, becoming greener, leading healthier lifestyles and spending more time with one another can endure these challenging times and come out victorious in the end.

Through Frugal Family articles, blogs, videos and social networking, she helps modern families rediscover some lost art forms such as cooking, sewing, and gardening. The goal is not to go back in time or become fanatical, but to help all families find simple and effective ways that fit into their lifestyle to make moderate changes with huge impacts. For more information, check out her blog http://frugalfam.wordpress.com/.

Viral Graphic: What If Solar Power Grew as Fast as Facebook? (Also …

In a slight switcheroo from viral video, here is a cool infographic from the One Block Off the Grid solar energy blog. As 1BOG notes: “Facebook recently passed 500 million users. If the growth rate of the world’s largest and fastest …

Heliotrope: The World's First Energy Positive Solar Home …

The home takes advantage of the sun by rotating with it, letting sun course thought its triple pane windows and fill its large roof mounted solar array and solar thermal pipes.

2 businesses go big on solar in San Clemente | solar, city, san …

News: 2 businesses go big on solar in San Clemente | solar, city, san, incentive, rainbow, projects, percent, sandals, businesses, jorgensen.

Solar Powered Toothbrush – Solar-powered toothbrush saves money on …

Solar Powered Toothbrush – If you don’t want your dentist to fill up cavities in your mouth while opening new ones in your bank account, then might we suggest you do your bit and make sure you brush your teeth at least twice…

Tofu made with solar power | MNN – Mother Nature Network

Want organic tofu made with solar power? House Foods America’s Garden Grove facility draws 10 percent of its tofu-making energy from the sun.

Plasma Gasification Plant Benefits For Municipal Waste Management

Plasma Gasification Plant (PGP) projects are being developed by at least five gas plasma technology companies, and there are real benefits to be obtained from this technology for the destruction of Municipal Solid Waste (MSW).

There is some debate still whether the process has been demonstrated to be a vaible technology which can be reliably operated by our waste management companies at reasonable cost and in compliance with all emissions regulations. However, the consensus seems to be largely in acceptance now that the technology is largely proven and inherently cleaner than incineration.

Although, gasification is used as a power generating technology, and gas plasma plants do provide a power feed-in to the local power grid, it should be realised by all that the purpose of selecting plasma gasification is currently that of achieving maximum waste mass destruction. The intent of the PGP is primarily to provide an efficent and clean method of dispoing of large quantities of residual MSW. Plasma gasification, although it does produce energy from waste is not primarliy an Energy from Waste (EfW) or Waste to Energy technology. There are other better proven, more efficient, and potentially always also cheaper ways to produce Energy from Waste, such as incineration.

PGPs suffer a high sacrificial load from the use of power at the electrodes to generate the plasma, and energy is also expended before the MSW reaches the plasma zone in the gasifier in chopping up and ensuring that the particle size of the waste is quite small. For this reason they do expend a large proportion of the power generated just in maintaining their own internal power demand.

However, as a waste destruction method producing an inert residue without creating at the same time high levels of toxic gaseous emissions the gas plasma process excels according to reports made to date. It has every reason to be cleaner as well because the reactions which take place in the plasma state take place so quickly and completely that the toxic organic chemicals produced in other combustion processes simply don’t get a change to be produced.

For a waste management process PGP therefore holds a very good prospect of adoption, as it is a process which is very efficient at diverting waste away from landfill, and thus scores highly among local authority waste disposal engineers who are constantly seeking to comply with regulations to reduce the amount of organic waste sent to landfill.

The PGP process however, also holds another merit and that is that it is being viewed more favourably by the public than incineration, and one main reason for that would be its clean emissions record when compared with incinerators historically.

Throughout Europe the requirement for BMW to be reduced by ever larger percentages necessitates the use of new technology to achieve this high rate of waste diversion, even after high recycling has also been achieved.

Look out for a plasma gasification plant appearing in a district near you soon, and look favourably upon it!

Steve has built a great web site where there are a lot more facts about gasification. This is a hot subject indeed for this technology which has become an essential read for all those who appreciate renewable energy issues and are interested in taking action to reduce the impact of climate change.Article Source: http://EzineArticles.com/?expert=Steve_D_Evans

Solar Vehicles: Innovative Transportation Designs Powered By The …

From The Daily Green’s Jim Motavalli: Everybody likes the idea of solar-powered vehicles, but it’s easier to imagine as science fiction than it is to make real.

California solar power plans are breaking through red tape …

The Genesis solar energy project will be located in Riverside County. Solar power may be on the rise in California with the state Public Utilities Com.

Solar Leasing 101: To Lease or Own?

A rapidly growing number of homeowners are choosing to lease, rather than own, their rooftop solar panels. This trend is facilitated by the high upfront costs of solar installation and the low-risk nature of the venture. …

Light Sanctuary: a Field of Solar Ribbons Rises in the Desert …

Light Sanctuary is a proposed ribbon of solar thin film panels to soak up the plentiful photons with new visual and immersive project.

Kenya's Solar-Powered Insurance For Farmers | Global Poverty …

When it comes to insurance for poor farmers, Kenya’s been using some innovative strategies worth watching. Earlier this year, for example, we wrote about a pioneering plan to insure cattle herders … Read more of this post, …

LEED: In Houston Schools Get More Than an E For Effort

We send our children to school every day and ask them to learn. They are, after all, the future of our world; and so we ask them to learn about right and wrong, learn about the world, and learn how to take care of each other. But do we want them to learn how to take care of the world, too?

That is what LEED Green Building schools in Houston and around the nation are doing. They are teaching the children, through example, what it means truly to earn an A for awareness of the environment’s needs. They stand for the future of America as a benchmark of creation care.

LEED Green Building schools are K-12 schools that are tailor-made to produce an environment safe and healthy for children, comfortable for teachers, cost-effective for the taxpayers, and easy on the environment. By addressing the uniqueness of school spaces and children’s health issues, LEED for Schools provides a unique, comprehensive tool for schools that wish to build green with measurable results. The rating system addresses issues such as classroom acoustics, daylight and views, mold prevention, and environmental site assessment.

In addition, Green schools cost less to operate, freeing up resources to truly improve students’ education. Their carefully planned acoustics and abundant daylight make it easier and more comfortable for students to learn. Their clean indoor air cuts down sick days and gives our children a head start for a healthy, prosperous future. And their innovative design provides a wealth of hands-on learning opportunities.

No longer must they learn through books about environmental safety and/or green projects around the world. Instead, they can learn hands-on at school – through observation and through practice.

Houston has taken the lead around the nation in building green schools. The Houston chapter is dedicated to showing school district leaders how the LEED FOR SCHOOLS process can benefit them. Other leading organizations in the area are also committed. Earlier this year, the Houston-Galveston Area Council joined with the Houston chapter to produce a year-long symposia to educate the public and educators about the facts and costs for LEED FOR SCHOOLS.

They ideally will have all their schools “Go Green” over the course of the next 10 years.

Other cities are following their lead. Salt Lake City, Grand Rapids and Seattle are all among the top cities with at least three green schools. And more are being built monthly. Both students and parents, teachers and administrators see the need and the benefits for green schools, and are lobbying for all school to change their ways.

For students and teachers, green schools mean reduced incidence of asthma, decreased absenteeism, improved academic performance and increased teacher satisfaction. For parents, green schools offer the confidence that comes with knowing their children spend their days in an environment that is both healthy and conducive to learning.

Green Schools get more than an E for effort. They are the bright and healthy future for our children.

Copyright 2009 – 2010 theLEED.com and Green Efficient. Article may be reproduced, unchanged, as long as it retains author information and linking.

Rick Walker is the CEO of Green Efficient. GreenEfficient is the leader in the LEED building maintenance and operations market. Primarily serving Texas, their LEED Accredited Professionals (LEED-APS) manage commercial facilities using their integrated services portfolio of LEED-compliant janitorial services, Integrated Pest Management services, HVAC maintenance, lawn care services, purchasing oversight, occupant training and USGBC submittal services. Offices in Houston, Austin, Dallas and Corpus Christi enable the most active Texas LEED construction markets to be covered by their specialty services. For information on LEED, green building and sustainable products, visit their blog: theLEED

NRN - Fortune Commercial

Taiwan market: Solar system companies protest opaque Taipower …

Representatives from solar energy system companies in Taiwan staged a protest at the Bureau of Energy to voice their disapproval of the lack of transparency in Taiwan Power Company’s (Taipower) on-grid approval process.

Oerlikon Solar Joins Global Zero Emissions Race

(Nanowerk News) Oerlikon Solar, the world’s leading supplier of thin film silicon photovoltaic (PV) production equipment, is the main sponsor of the Oerlikon Solar Racing Team participating in the Zero Emissions Race with its Zerotracer …

Investorideas.com – Solar Stocks Commentary; Developments at XsunX …

Solar Stocks Commentary; Developments at XsunX (OTCBB: XSNX), Sunpower (NASDAQ: SPWRA, SPWRB), Chevron Energy (NYSE: CVX)

Will rooftop solar go mainstream? « Marc Gunther

I’ve written about SunRun before (See SunRun: A New Deal for Solar and Solar’s Strange Bedfellows) but the company is growing so fast, albeit off a small base, that it makes a lot of news. The PG&E, Home Depot and Toll Brothers …

LDK Solar (LDK) Smashes Estimates, Guides Way Above | Green Stocks …

LDK Solar (LDK) has hit it out of the park today, smashing analyst estimates and guiding way above estimates for next quarter and the full year. The.

Going Green-6

Green Shopping Basics – What You Should Know Before You Shop Green

Going green always starts with good intentions, but the massive amount of green terms can sometimes be overwhelming. Here’s some of the common green terms you’ll hear and what they mean.

Organic
The term organic can often be used very broadly, but typically refers to products that have only organic components, produced without pesticides, herbicides, insecticides, or fertilizers or other harmful chemicals.
Look for: USDA Certified Organic

Sustainable
Products or materials that are described as being sustainable contain materials that do not deplete the Earth of its resources and is easily replenished. There are many common types of materials that are considered sustainable:

Bamboo - Bamboo is a fast-growing and renewable resource that can be used to make fabrics, flooring, furniture and other products.

Jute – Jute is a long and shiny vegetable plant fiber that can be woven into a strong thread or twine. It is commonly used to create cloth or used within carpets, and rugs.

Hemp – Hemp is a fast-growing plant that is most commonly used for its strong fibers to create cloth used in bags and clothing. It can grow organically and also be used to create oils for cosmetic products as well as be used in food.

Sustainable Wool – There are many types of sustainable animal wools such as alpaca fibers or merino wool that can be used to create strong fibers commonly used in clothing.

Energy-Efficient
Products that are energy-efficient are design to consume less energy when operating without sacrificing performance, reducing long-term environmental and cost impacts. Energy-efficient products can range from appliances to light bulbs as well as contain different levels of efficiency.
Look for: Energy Star Qualified, EPEAT Rated

Post-Consumer Recycled
Once a product has completely served its purpose, what remains are post-consumer materials that would otherwise be disposed as waste but are instead recycled. This would include products such as old packaging, glass bottles, aluminum cans, and plastics. When you recycle from your home these products become post-consumer recycled.

How is this different vs recycled? Regular recycled materials can contain a combination of materials, often coming a scraps or other by-products as a result of manufacturing. This could include both pre-consumer and post-consumer waste.

Recyclable
A recyclable product means that it can be recycled and be used to create future products. Polypropylene #5 is a common plastic to look for in products which is one of the most easily recyclable plastics.
Look for: Polypropylene #5

Reusable
Reusable products mean that a product can be used multiple times before the product is discarded or recycled. Some common reusable products are shopping bags, water bottles and tableware.

Fair Trade
Fair Trade is a social movement that promotes certain standards of sustainability practices and empowering producers in developing nations. Fair trade supports fair prices, fair labor conditions, community development and environmental sustainability.

Volatile Organic Compounds (VOCs)
VOCs are organic chemical compounds that have high vapor pressure and easily evaporate at room temperature. VOCs can be released from many household items such as paints, flooring, upholstery, and cleaners. These VOCs are not only air pollutants but have also been known to cause health effects as well.
Look for: Low-VOC, Zero-VOC

Bisphenol A (BPA)
BPA is an organic compound that is used in the creation of many plastics and resins. Most commonly you will find BPA used polycarbonate bottles. While there is some controversy about the effects of BPA, some research has raised serious health concerns about the usage of BPA.
Look for: BPA-free

Biodegradable
Biodegradable means that a substance can be naturally decomposed by biological processes. If a product is biodegradable, this means that it can be disposed of with no negative environmental impacts.

Solar-Powered
Solar powered products are powered using energy from the sun. Solar power can be used in a range of products from small household gadgets to entire home heating systems.

Now you’re ready to start shopping for green products!

To learn about more about shopping for green products, please visit the All Green Store.

Always Rely on Professionals Proper Installation of Wind Turbines is Very Important

The most efficient and economical way of using wind power to light up your home is to install a windmill or wind turbine as they are also called. The current trend is to use green energy to supplement energy generated from fossil fuels to ensure uninterrupted supply and protection of the environment.

Wind turbines of different sizes are available for your different requirements. If you live in an area where the average wind speed ranges around 10 to 12 miles per hour, you can install a wind turbine to generate electricity throughout the year. Depending on your energy requirements, you can opt for the right sized wind turbine starting from 2Kw units to even 20 Kw units.

Choosing a wind turbine manufactured by a reputed maker is essential but your task does not end there. You should choose the right contractors for installation of the wind turbine. Proper installation of wind turbines is very essential because of the following reasons.
• Installation of a 42 feet or more structure is not a simple task. The installation must be perfect to ensure that there are no safety concerns. Even the smallest flaw in installation can have severe consequences.
• A wind turbine may look like nothing more than a fan attached to a long pole. However, it is a complex and delicate mechanism that can be damaged with careless handling and improper installation. This can render your entire investment totally waste.
• The fans of the wind turbine may seem to be revolving very slowly from ground level. However, the height and the weight of the fans combined with its velocity can cause a lot of damage if breakage or other malfunction occurs.
• It is common to make use of the land beneath a windmill for other purposes. If you ensure that the wind turbine is safely installed, you can set up structures under the wind turbine without any fear of accidents and injuries.
• Setting up a wind turbine for your home will ensure that your energy requirements are taken care of forever. However, this requires a high initial investment. Improper installation will mean that your entire investment goes waste without sufficient benefits. What is the point of sinking thousands of dollars into your windmill if it conks off within a few days and you have to spend more repairing a faulty installation?

Hence, you should always deal with professional wind turbine contractors who know what they are doing. How to identify reliable contractors from all those who claim to be the best? For starters, all professional contractors who take up such projects of green energy offer a free quote. They do not charge for a quote which helps you estimate the cost of the project. Rather, they would be more than happy to offer the quotes for free.

Another way to identify professional service providers is to take a look at the spares and materials they use. Professional wind turbine installers will never use counterfeit material to reduce cost.

They follow strict safety codes and comply with all professional standards at all times. The net result of dealing with such installers for your green energy requirements is that you are assured of the best service at all times.